Wireless series PLC Cable  

Replace your wired Serial/USB programming cable!

1.Support FX series PLC (FX0 FX0N FX2N FX1N FX1S FX0S FX3U and all Mitsubishi round 8-pin RS422 port)

2.Support Windows XP WIN7

3.Support line, depending on each other, no shelter, no shielding, open area, 10 m wireless transmission distance

Product Description:

1, using mainstream CSR Bluetooth chip (authorization chips, no flow limitation), Bluetooth V2.0 protocol standards.

2, serial module operating voltage 3.3V. (PLC serial port to take power, with linear regulator device, no external power supply)

3, and the PLC parameter settings as the default factory settings.

4, built plus an external high gain antenna, the transmission distance open area effective distance 10 m (unshielded, no obstructions, each depending on the state line), over this distance is possible, but do not do this from the connection quality assurance (general cable programming cable only 2-3 meters, so this distance is enough!)

5, the working current: pairing: 30 ~ 40mA paired with not communicating: 2 ~ 8Ma communication: 8mA

6, automatic pairing, after power on the receiver automatically searches emitter, without human intervention, LED lit after pairing.

7, completely replace wired serial cable and USB wired cable.          

Size: 60 × 45 × 23 (mm)            

8, can be used with notebook computers, desktop computers seamlessly.

9, with LED indicator (for Bluetooth pairing and data transmission for light indication) at a glance!

10, paired with full-duplex serial port to use when, without knowing any Bluetooth protocol Bluetooth pairing after connection automatically switches to transparent mode, directly replace the original wired serial cable without the need to modify the program.

11, good baud Bluetooth settings, names, pairing password, set the parameters such as power-down save, will not be lost (good setup and testing before delivery, without any of your settings).

12, other applications: can connect a variety of serial printer, residential access control systems, single-chip communications, data acquisition and other wireless connections.

13, there is no version for programming software requirements, and the original cable programming cable you are using exactly the same!

14, because the transmitter and receiver is completely isolated without any electrical contact, so this product supports hot-swap (hot plug)!

Usage instructions

1, LED Data Indicator: blue or yellow, flashes when data exchange

2, LED pairing indicator: green, matching the future is lit. After pairing can be programmed to upload, download, real-time monitoring and other operations! (General transmitter and receiver pair time ranging from a few seconds to ten seconds)

3, LED power indicator: Red, Always

4, please do not attempt to disassemble the device, that would cause internal damage. (Disassemble damaged by not warranty)

5, prohibits the transmitter and receiver shield, so will not be able pairing and communication.

6, in general, the best first USB receiver into your computer's USB socket, let the computer detect the COM port and then the other end of the transmitter into the PLC communication port, because some of the PLC operates in master mode, it is always in constant communication port to send data out, such as the first port of PLC transmitter inserted correctly identify the host will reduce the speed and time from the machine.

7, on the PLC to adjust the angle of the Bluetooth transmitter can change the communication distance, it is recommended that you use to adjust to the best communications perspective (the strongest signal transmission furthest)

Package include:

• Wireless bluetooth programming adapter transmitter and receiver

•  Software CD