Wireless series PLC Cable  

Replace your wired Serial/USB programming cable!

1.Support  S7-300/400 PLC

2.Support Windows XP Windows 7 32bit 64bit 

3.Support MPI 19.2Kbps  187.5Kbps 1.5Mbps

4.Support PC Adacter (Auto) ,PC Adacter MPI, PC Adacter(PROFIBUS)

5.Support line, depending on each other, no shelter, no shielding, open area, 10 m wireless transmission distance

6.Build-in antenna, Wireless communication distance 10~30M.

7.Replace wired USB or Serial programming cable, very easy to use and carry!

Product Description:

1, using mainstream CSR Bluetooth chip (authorization chips, no flow limitation), Bluetooth V2.0 protocol standards.

2, serial module operating voltage 3.3V. (PLC serial port to take power, with linear regulator device, no external power supply)

3, and the PLC parameter settings as the default factory settings.

4, built plus an external high gain antenna, the transmission distance open area effective distance 10-30 m (unshielded, no obstructions, each depending on the state line), over this distance is possible, but do not do this from the connection quality assurance (general cable programming cable only 2-3 meters, so this distance is enough!)

5, automatic matching, after power on the receiver automatically searches emitter, without human intervention, LED lit after pairing.  

6, completely replace wired serial cable and USB wired cable.    8, PLC can be used with notebook computers, desktop computers seamlessly.  

9, with LED indicator light (on the working status light indication) at a glance!  

10, paired with half-duplex serial port to use when, without knowing any Bluetooth protocol Bluetooth pairing after connection automatically switches to transparent mode, directly replace the original wired serial cable without the need to modify the program.  

11, good baud Bluetooth settings, names, pairing password, set the parameters such as power-down save, will not be lost (good setup and testing before delivery, without any of your settings).  

12, built-in MCU MCU, automatic conversion protocol transparent data transmission!  

13, because the transmitter and receiver is completely isolated without any electrical contact, so this product supports hot-swap (hot plug)!  

Usage instructions

1, LED indicator Red: power indicator                Green or blue: pairing indicator, Bluetooth pairing Steady                          Blue and green: TX RX data transfer instructions (flashes when there is data exchange)  

2, LED indicator flashes paired frequency 1 / s when it is paired state, after pairing is lit,               After pairing can be programmed to upload, download, real-time monitoring and other operations! (General transmitter and receiver pair time ranging from a few seconds to ten seconds)  

3, the computer using the USB receiver need to install the USB driver (with CD-ROM), PLC using the transmitter does not require drivers.  

4, please do not attempt to disassemble the transmitter and the receiver, that would cause internal damage.  

5, for technical confidentiality, the product does not mass production! !  

6 to prohibit the transmitter and receiver shield, so will not be able pairing and communication.  

7, in general, the best first USB receiver into your computer's USB socket, let the computer detect the COM port and then the other end of the transmitter into the PLC communication port, because some of the PLC operates in master mode,      It is always in constant communication port to send data out, such as the first port of PLC transmitter inserted correctly identify the host will reduce the speed and time from the machine.  

8, built-in antenna angle directly affects the transmission distance, the transmitter and receiver communicate with each other under the farthest visible state.  

Package include:

• Wireless bluetooth programming adapter transmitter and receiver

•  Software CD